Use in FPS to automatically deliver the proper amount of treatment chemical(s) to prevent the occurrence or reoccurrence of MIC and to greatly reduce corrosion involving oxygen. For most effective treatment of newly installed FPS, use the MICtreat® FPS System before commissioning the FPS. For existing FPS, use the MICtreat® FPS System after mitigating any existing corrosion, including MIC, in the FPS.
Use in FPS with system volumes greater than 5,000 gallons.
Ideal for treating all types of FPS (wet, dry, preaction), whether existing or new installation. May also be used in antifreeze/glycol systems.
Note: MICtreat® FPS System is most effective when used with BTI Products’ MICtreat® FPS Chemical. BTI Products can provide detailed, facility-specific protocols for treatment of FPS. See Services>Consulting Services>Mitigation Protocols for further details.
For FPS Volumes: >5,000 gal
Water Flow Rate: Properly treats 15 to 80 gpm of water flow to 400 ppm MICtreat® FPS Chemical
Assembly Requirements: Minimal
Power Requirements: Standard 115-Volt, 15 amp power supply
Pressure Rating: Minimum 250 psi rating on all components